Arcade1up Marvel Vs. Capcom 2 Replacement Upgraded Marquee Insert! Free Shipping

As A1up evolves their cabs with more of an ergonomic Marquee design, Retro530 will now offer upgrades to help improve some of the A1up Marquee artwork that lacks Important original details and image washout.
 
We wanted to continue to use the same art inserts graphic technique that we use in the regular fully enclosed Marquees. The colors are vibrant and the black levels are accurate!
 
Here is information and installation techniques for this marquee replacement.
 
Marquee insert: This marquee is an upgrade swap out. If you haven't already built your cab it will be super easy as it slides into the frame when constructing your cab! If you have already built your cab, you will need to disassemble one side to remove the stock marquee to replace it for the upgrade! There are also reports of the top being removed to easily instill the marquee upgrade from the top.
 
Here is a helpful install tutorial from 19kfox showing how to install the Blitz insert. It's the same process! https://youtube.com/watch?v=qnA4kNBCrSs&si=EnSIkaIECMiOmarE
 
There will be 3 pieces with your order!
1 High-quality graphic insert
1 front 1/16" Plexi (remove blue film)
1 thin 1/32" Plexi (remove film) for the back, if you choose to use it.
 
You can sandwich all 3 together or use the front Plexi with the art. It’s entirely up to you. Laying the cab on its side, make sure the pieces slide into the bottom groove one at a time. The sides will form tight once you assemble them together. Once it’s standing up, you can adjust the Plexi and art inside by loosening one side of the cab slightly and re-tightening. Enjoy!
 
Not sure what to do with the leftover stock Marquee piece? Use the wall tab included, to hang in your Arcade to decorate!
 
Don't forget to light up the Coin Door! 
https://www.retro530.com/product-page/arcade1up-led-kit-for-new-coin-doors
 
Thanks again for all the support!